DoubleCrestedCormorant

Metadata:

• Identification_Information
• Data_Quality_Information
• Spatial_Data_Organization_Information
• Spatial_Reference_Information
• Entity_and_Attribute_Information
• Distribution_Information
• Metadata_Reference_Information

Identification_Information:

Citation:

Citation_Information:

Originator:

The British Columbia Marine Conservation Analysis (BCMCA), a Tides Canada Initiatives Project

Publication_Date: 03/2010

Title: DoubleCrestedCormorant

Geospatial_Data_Presentation_Form: vector digital data

Online_Linkage:

\\vancouverserver\gis\BCMCA\data4Marxan_May2010\Seabirds\nearshore_marxan_features.mdb

Description:

Abstract:

The British Columbia Marine Conservation Analysis (BCMCA) is a collaborative project assembling and analyzing spatial information about Canada's Pacific Ocean. The overall goal of the BCMCA is to identify marine areas of high conservation value and marine areas important to human use. Results of the project are intended to inform and help advance marine planning initiatives in BC by providing collaborative, peer-reviewed scientific analyses based on the best ecological and socio-economic spatial data at scales relevant to a BC coast-wide analysis.

Purpose:

The purpose of this dataset is to incorporate all near shore data identifying Double-crested Cormorant winter sites (December, January, February), process and summarize weighted densities by BCMCA planning unit to help inform the marine feature identified at the BCMCA Seabirds Workshop. Data presented as 2 km x 2 km planning units for MARXAN analysis.

Supplemental_Information:

This dataset is a compilation of data collected by many people, for different purposes, using different survey techniques with different methodologies within each technique and, therefore, considerable care must be taken when using the data, even for site-specific inquiries. Refer to the original metadata document for data limitations and usage. Title or link is provided within source information. Data was collected, merged and buffered (if applicable) by target feature layer using the following data sources: 1.Bird Studies Canada (BSC) BC Coastal Waterbirds Survey (BCCWS_polygons.shp). 2.Coastal Waterbird Inventory Survey (cwi_bc.shp, cwidat_bc.dbf). 3.BC Ferry Swartz Bay to Tsawwassen (transects_poly150.shp). 4.Victoria Capital Region District Harbours Atlas. (Bird_survey_polygons.shp). 5.Burrard Inlet Environmental Action Plan (BIEAP): Winter Bird Surveys 1993-1996 (BIEAP_Subsectors_Albers.shp). 6.West Vancouver Island Waterbird Survey. (qwcsln_vi_r2.shp).

Time_Period_of_Content:

Time_Period_Information:

Single_Date/Time:

Calendar_Date: unknown

Currentness_Reference: ground condition

Status:

Progress: In work

Maintenance_and_Update_Frequency: Unknown

Spatial_Domain:

Bounding_Coordinates:

West_Bounding_Coordinate: -132.257326

East_Bounding_Coordinate: -122.354992

North_Bounding_Coordinate: 54.439366

South_Bounding_Coordinate: 48.210519

Keywords:

Theme:

Theme_Keyword_Thesaurus:

REQUIRED: Reference to a formally registered thesaurus or a similar authoritative source of theme keywords.

Theme_Keyword: Double-crested Cormorant

Theme_Keyword: winter

Theme_Keyword: weighted densities

Place:

Place_Keyword: British Columbia

Access_Constraints:

This dataset is subject to the terms and conditions of a data license agreement.

Use_Constraints:

This dataset is subject to the terms and conditions of a data license agreement:

Point_of_Contact:

Contact_Information:

Contact_Organization_Primary:

Contact_Organization: British Columbia Marine Conservation Analysis

Contact_Person: Karin Bodtker

Contact_Position: Co-Chair

Contact_Address:

Address_Type: mailing and physical address

Address: 1405-207 West Hastings Street

City: Vancouver

State_or_Province: BC

Postal_Code: V6B 1H7

Country: Canada

Contact_Voice_Telephone: 604-696-5044

Contact_Electronic_Mail_Address: kbodtker@livingoceans.org

Native_Data_Set_Environment:

Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.3.1.3500

Data_Quality_Information:

Lineage:

Source_Information:

Source_Contribution:

Bird Studies Canada (BSC) BC Coastal Waterbirds Survey. Dataset name: BCCWS_polygons.shp. Metadata document: Coastal Waterbird Survey summary metadata March 2007.doc. Volunteer-based monitoring program for coastal waterbirds started in September 1999. The monthly surveys are shoreline-based for the period of September through April. Observers undertake surveys at sites with clearly defined boundaries once per month from September through April, and identify and count all coastal waterbirds with binoculars and/or spotting scope. Purpose is to obtain a relative index of coastal waterbird populations and information on the distribution and ecology of wintering coastal waterbirds in BC. Dataset supplied includes spatial layer. All bird occurrences and counts stored in a raw data format and included within excel spreadsheet; approx 75,000 records. Bird occurrences are documented by site location, rather than individual sighting locations and can be joined to spatial polygon data via SiteCode. Refer to original metadata document (listed above) for more information regarding survey background, methodology and data limitations.

Source_Information:

Source_Contribution:

Coastal Waterbird Inventory Survey. Dataset name: cwi_bc.shp. Associated tables: cwidat_bc.dbf, cwilut_bc.dbf. Metadata document: cwi_meatadata_26March07.doc. Extent: Coast Wide. Compilation of data from Duck Unlimited and Canadian Wildlife Service. Includes ground surveys (back to 1919), boat surveys, and aerial surveys. The surveys were conducted with the primary purpose of locating concentrations of waterbirds on the coast of British Columbia. Originally the data were received in five separate files (CWIF1.DBF, CWIF2.DBF, CWIF3.DBF, CWIF4.DBF, CWIF5.DBF) and were combined into above tables. Refer to original metadata document (listed above) for more information regarding survey background, methodology and data limitations.

Source_Information:

Source_Contribution:

BC Ferry Swartz Bay to Tsawwassen. Dataset name: transects_poly150.shp. Metadata document: ferrySurveys_meta20080208.doc. Extent: Southern Strait of Georgia. Strip transects conducted aboard BC Ferry vessel transiting between the Swartz Bay and Tsawwassen terminals. Counts were conducted during four back to back crossings, on each of three consecutive days (for a total of 12 crossings) each month. The area (km2) surveyed was determined using the width on either side of vessel 150m. DBF table (Survey_data) contains estimated segment length, survey width, and area. Bird densities derived from counts/area (km sq). Spatial data supplied consists of line shapefile with original transect linework, and polygon shapefile with transects buffered to a 300m total width. Refer to original metadata document (listed above) for more information regarding survey background, methodology and data limitations.

Source_Information:

Source_Contribution:

Victoria Capital Region District Harbours Atlas. Dataset name: Bird_survey_polygons.shp. Metadata document: Not supplied, however, updated using ArcCatalog. CRD supplied 2 spatial polygon layers (Bird_survey_polygons & VEHEAP_Harbours_Sub_Areas), 2 DBF's (HARB9798 & HARB99), and 2 excel workbooks (Biird_S_Graphs & Bird_Survey_wo_Marine-Birds_By_Area_And_Season). Polygons used for displaying data from 1997-1999 bird surveys. Includes Portage Inlet, Gorge Waterway, Victoria Harbour, Esquimalt Harbour, and Esquimalt Lagoon. Note: Used HEIR (TRIM where there was no HEIR) shore combined with polygons digitized from un-projected file used for original survey.

Source_Information:

Source_Contribution:

CWS Burrard Inlet Environmental Action Plan (BIEAP): Winter Bird Surveys 1993-1996: Spatial Trends in the Distribution and Abundance of Water Birds in Burrard Inlet during Selected Winter Months in 1993 and 1994. Dataset name: BIEAP_Subsectors_Albers.shp. Tables: Max_Month_Subsector_Taxo.tbl Metadata Document: BIEAP_1993_1994_DatabaseMetadata.doc Extent: English Bay, Burrard Inlet, and Indian Arm. The Goal of this dataset was to analyse and summarize ~15000 sightings of more than 100 bird species collected 1993 to 1995 (second half of data collected was omitted due to differing observational methodology). Counts were from observers traversing shoreline by boat, bike or car with binoculars or spotting telescopes. The data consists of counts stored in an access database, and corresponding polygonal shapefiles divided into sectors and subsectors that can be cross referenced to the count data in the access database. Observation locations were added to pre-made polygons along the shore of the study area. Refer to original metadata document (listed above) for more information regarding survey background, methodology and data limitations.

Source_Information:

Source_Contribution:

West Vancouver Island Waterbird Survey. Dataset name: qwcsln_vi_r2.shp. Metadata document: pwrc_meta_WVI_birds_1999-2000.doc. Extent: West Coast Vancouver Island. The data supplied are the results of six aerial surveys of waterbirds conducted on the west coast of Vancouver Island during the spring of 1999 and the winter of 2000. The surveys covered approximately 50% of the 3900 km shoreline between Cape Scott and Port San Juan. Two observers, both in the rear of the aircraft, recorded all birds along transect within 50 m of either side of the plane. A third person, seated in the front, recorded the observations. Supplied datasets: line shapefile storing transect data and point shapefile storing transect point locations (lat/long). Excel spreadsheet with raw survey data - bird occurrences and counts. Refer to original metadata document (listed above) for more information regarding survey background, methodology and data limitations.

Source_Information:

Source_Contribution:

Alan Burger data: Southwest VI Shelf seabirds (Data and leg files: shf_data, shf_plotted_data, tb_data, tb_plotted_data). Metadata document: Burger methodology.doc. Other documentation: legend_beale_new_cjg.xls. Extent: West Coast Vancouver Island. Data supplied and organized in two folders: Data Files and Leg files. Folders contain various files for each traverse of the transect carried out by Dr. A. Burger off the West Coast of Vancouver Island. Each of the leg files contains minute by minute observation location for a coordinating bird observation data file. Process to spatially locate bird observation data from 1987 to 1995 undertaken by Catherine Griffiths (GIS Consultant). Refer to original metadata document (listed above) for more information regarding survey background, methodology and data limitations.

Source_Information:

Source_Contribution: BCMCA 2 km x 2 km planning units for the Canadian Pacific EEZ.

Process_Step:

Process_Description:

<<The methods used to combine datasets to identify areal extents and densities of Double-crested Cormorant winter sites are as follows >>

Source_Used_Citation_Abbreviation:

\\CRMLTD03\E$\F\Crm1143\Source\080818_SourceDocs\Original_Data\Plants\BCMCA_Plants.gdb

Process_Step:

Process_Description:

>Prepared BC Coastal Waterbirds Survey dataset: 

Imported excel worksheets "BCCWS raw data 1, raw data 2, raw data 3" from Coastal Waterbird Survey data '99-'08.xls into a geodatabase. To join tables to spatial, created new field, SITECODE, in all 3 tables. Using field calculator, populated SITECODE field with following formula: [RegionCode]& [SiteNumber]. Create one field storing date (ymd) rather than 3 fields. Populated field using field calculator with the following formula: [Year_]&"/"& [Month_]&"/"& [Day_]. To combine all 3 tables into one table, used the Append tool and appended raw data 2 and raw data 3 to raw data 1 table. Deleted "Year_" Month_" and "Day_" fields using Delete Field tool. Added 3 new fields using Add Field tool: Feature, Data_Source, Dataset_ID. Populated fields using Calculate Field tool. Feature field calculated to equal the SpeciesCode field. Standardized the Feature field naming convention to equal the common name of the marine species rather than the abbreviated species code. Data_Source field calculated to equal the name of the dataset from which data was derived. Dataset_ID field calculated to equal the common dataset identifier as categorized by BCMCA.

Process_Step:

Process_Description:

Re-projected spatial layer from NAD 1983 Albers to NAD 1983 BC Environment Albers using Project tool. All polygons with the same Sitecode were merged so that there were no duplications in the Sitecode field. To ensure areas matched in both the spatial and the survey data, the total shape area in the spatial was summed where duplicate Sitecodes and cross-checked with area recorded in corresponding SiteCode records in raw excel data. Once the areas were verified, duplicate polygons were merged using merge operation (Advanced Editor toolbar) into one and Name field updated to reflect entire survey location. Duplicate SiteCode records were found in GIMA1 (3 records), GIMA2 (4 records), GISE1 (2 records), and QCMA4 (2 records).

Process_Step:

Process_Description:

Using MS Access query, selected all records within raw data table where SpeciesCode = 'DCCO' with survey months >11 or <3. Exported selected species' records into a feature table. To calculate the total number of surveys, two queries were created using Microsoft Access. The first query was created to record all instances of survey dates meeting the features' winter specifications within each survey polygon (i.e. each date instance was assigned a value of 1), grouped and ordered by polygon. To eliminate duplicate counts (i.e. each species recorded has a survey date), only the first date instance was assigned a value of one. The second query was created to count and sum all date instances within each grouped polygon.

Process_Step:

Process_Description:

For each SiteCode, summarized feature table to get the average bird counts. Included the number of surveys in which the species was sighted and the total number of surveys table. Joined feature table to spatial using SiteCode field and exported into a feature class. Added a new field, Season, and calculated to equal the season in which the feature is identified as specified by BCMCA. Note: a few records in the aspatial table did not have matching SiteCodes within the spatial layer. Deleted all unnecessary fields using Delete Fields tool.

Process_Step:

Process_Description:

<<Prepared Coastal Waterbird Inventory Survey dataset: Using MS Access query, selected all records within cwidat_bc table where SPECIES = 'DCCO' with survey months >11 or <3. Exported selected species' records into a feature table.

Process_Step:

Process_Description:

Re-projected cwi_bc.shp from PCS Albers to NAD 1983 BC Environment Albers using Project tool. Related 2 survey tables (cwilut_bc/cwidat_bc) to spatial, and extracted all spatial lines correlating to target feature into a separate feature class. Reviewed Digitized field and where "F2", spatial lines were merged according to each unique combination of SHOREUNITS2 field to create a one-to-one relationship with the survey data. New fields were created (UNIQUEID, NEWID) in order to provide a link to the corresponding survey data. Where applicable, all null and non-spatially linked shoreunits in the feature tables were deleted in order to maintain the same record count in both the spatial and table (refer to associated text file listing null and non-spatially linked records). Joined cwidat_bc feature table to spatial layer using NEWID field and exported to a feature class. Added 5 new fields using Add Field tool: Season, Feature, DATA_SOURCE, Dataset_ID and Buffer_m. Populated fields using Calculate Field tool. Season field calculated to equal the season in which the feature is identified as specified by BCMCA. Feature field calculated to equal common name of the marine feature as identified within the COMNAME field. DATA_SOURCE calculated to equal the name of the dataset from which data was derived. Dataset_ID field calculated to equal the common dataset identifier as categorized by BCMCA. Buffer field calculated based on Survey_Method used: 50m radius (ground, air, and unknown surveys), 150m radius (boat surveys). Buffered shorelines using Buffer tool based on Buffer field. Deleted un-necessary fields using Delete Field tool.

Process_Step:

Process_Description:

<<Prepared BC Ferry dataset: Added a new field within the Survey_data table to store the date (within first 6 digits of Transect_ID field) and calculated to read yyyy/mm/dd format. Selected all records within Survey_data where [DCCO] > 0, and survey months >11 or <3. Species' records meeting the criteria were exported into a feature table. To calculate the total number of surveys, two queries were created using Microsoft Access. The first query was created to record all instances of survey dates meeting the features' winter specifications within each segment (i.e. each date instance was assigned a value of 1), and then grouped and ordered by Segment_ID. To eliminate duplicate counts (i.e. each species recorded has a survey date), only the first date instance was assigned a value of one. The second query was created to count and sum all date instances within each grouped Segment. A similar query to the above was used to calculate the surveys in which species were sighted. Data was recorded in various time intervals along a segment on a given survey date. In these cases, only the first unique survey date was given a count value of one to avoid redundant survey counts and for consistency with the total surveys count.

Process_Step:

Process_Description:

For each Segment_ID, summarized feature table by average bird counts. Included the number of surveys in which the species was sighted and the total number of survey tables. Added 4 fields using Add Field tool: Season, Feature, Data_Source, Dataset_ID. Populated fields using Calculate Field tool. Season field calculated to equal the season in which the feature is identified as specified by BCMCA. Feature field calculated to equal the common name of the marine species as identified within species code attribute. Data_Source field calculated to equal the name of the dataset from which the data was derived. Dataset_ID field calculated to equal the common dataset identifier as categorized by BCMCA. Joined feature table to spatial layer using Segment_ID field in the table and Segment field in the spatial and exported into a feature class. Re-project from NAD 1983 Albers to NAD 1983 BC Environment Albers using Project tool. Buffered line segments by 150m (radius) using Buffer tool.

Process_Step:

Process_Description:

<<Prepared CRD dataset: Prepared Year_Round_Calcs excel spreadsheet within Biird_S_Graphs.xls and imported to a geodatabase table. Re-formatted Date_field to string and (yyyy/mm/dd) format. Using Microsoft Access query builder, selected all Species equal to 'DCCO' with months >11 or <3. Species' records meeting the criteria were extracted into a feature table. To calculate the total number of surveys, two queries were created. The first query was created to record all instances of survey dates meeting the features' winter specifications within each polygon (i.e. each date instance was assigned a value of 1), and then grouped and ordered by polygon. To eliminate duplicate counts (i.e. each species recorded has a survey date), only the first date instance was assigned a value of one. The second query was created to count and sum all date instances within each grouped polygon. A similar query to the above was used to calculate the surveys in which species were sighted. In some cases, data was recorded within a polygon on the same survey date, usually when there was more than one observer. In these cases, only the first unique survey date was given a count value of one to avoid redundant survey counts and for consistency with the total surveys count.

Process_Step:

Process_Description:

Re-projected Bird_surveys_polygons from NAD 1983 UTM Zone 10N to NAD 1983 BC Environment Albers using Project tool. For each polygon, summarized feature table by average bird counts. Included total species sighted and total number of survey tables. Added 4 new fields using Add Field tool: Season, Feature, Data_Source, Dataset_ID. Populated fields using Calculate field tool. Season field calculated to equal the season in which the feature is identified as specified by BCMCA. Feature field calculated to equal the common name of the marine species as identified within the Species field. Data_Source field calculated to equal the name of the dataset from which the data was derived. Dataset_ID field calculated to equal the common dataset identifier as categorized by BCMCA. Joined feature tables to spatial layer using Poly field in spatial and Polygon field in table and exported to a feature class. Deleted unnecessary field using Delete Field tool.

Process_Step:

Process_Description:

<<Prepared BIEAP dataset: Using select by attributes, selected records within Max_month_Subsector_Taxo table where [SPECIES_NM] = 'Double-crested Cormorant' AND [MONTH_] = 12 OR [MONTH_] = 1 OR [MONTH_] = 2 and extracted to a separate feature table. To calculate the total number of surveys, two queries were created using Microsoft Access. The first query was created to record all instances of survey months meeting the features' winter specifications within each survey polygon (i.e. each date instance was assigned a value of 1), and then grouped and ordered by polygon. To eliminate duplicate counts (i.e. each species recorded has a survey month), only the first month instance was assigned a value of one. The second query was created to count and sum all month instances within each grouped polygon.

Process_Step:

Process_Description:

For each Subsector_ID, summarized data by average birds counts (located within the Max_Count field - the peak bird count observed within the month) for all survey months. Included the number of surveys in which the species was sighted and the total number of surveys table. Added 4 fields using Add Field tool: Feature, Data_Source, Dataset_ID and Season. Populated fields using Calculate Field tool. Feature field calculated to equal the common name of the marine species as identified within the SPECIES_NM field. Data_Source field calculated to equal the name of the dataset from which the data was derived. Dataset_ID field calculated to equal the common dataset identifier as categorized by BCMCA. Season field calculated to equal the season in which the feature is identified as specified by BCMCA. Joined feature table to BIEAP_Subsectors_Albers.shp using SubSector_ID field in table and Subsector field in spatial. Extracted selected records into a feature class using NAD 1983 BC Environment Albers as coordinate system.

Process_Step:

Process_Description:

<<Reviewed MBAOI, Moulting Sea Duck, PSS and LBCS datasets: Dataset was not used for feature creation as all data within MBAOI has already been received and processed. All other dataset were not used for feature creation as species identified did not meet the specified "winter" month feature requirements.

Process_Step:

Process_Description:

<<Prepared West Vancouver Island Waterbird Survey dataset: Defined projection from unknown to NAD 1983 BC Environment Albers using Define Projection tool. Converted shapefile to feature class using feature class to feature class tool.

Process_Step:

Process_Description:

Using MS Access query, selected all records within tblBirds where species = 'DCCO' with survey months >11 or <3 and exported to a feature table. Included the number of surveys in which the species was sighted and the total number of surveys for that area in that time period. To calculate the total number of surveys, two queries were created using Microsoft Access. The first query was created to record all instances of survey dates meeting the features' winter specifications on each transect (i.e. each date instance was assigned a value of 1), and then grouped and ordered by transect. To eliminate duplicate counts (i.e. each species recorded has a survey date), only the first date instance was assigned a value of one. The second query was created to count and sum all date instances within each grouped transect. A similar query to the above was used to calculate the surveys in which species were sighted. In some cases, data was recorded in various time intervals along a transect on a given survey date. In these cases, only the first unique survey date was given a count value of one to avoid redundant survey counts and for consistency with the total surveys count.

Process_Step:

Process_Description:

For each TRANSCT_ID, summarized data to display average bird counts for all months/years. Added 3 fields using Add Field tool: Feature, Data_Source, Dataset_ID. Populated fields using Calculate field tool. Feature field calculated to equal the common name of the marine feature identified within the Species field. DATA_SOURCE calculated to equal the name of the dataset from which data was derived. Dataset_ID field calculated to equal the common dataset identifier as categorized by BCMCA. Joined feature table to spatial line layer (qwcsln_vi_rz.shp) using TRANSCT_ID field and exported to a feature class. Buffered lines by 50m (radius). Note: original line work likely not cleaned, some overshoots (bends) and splits occur. Flat end buffer types do not handle bends/splits as it creates small triangles.

Process_Step:

Process_Description:

>Prepared Burger data:

Exported all excel survey worksheets (those labeled "coded") into a personal geodatabase. Appended all relevant survey tables into one master table. Added 2 new fields to spatial layer using Add Field tool: Mid_XCOORD, Mid_YCOORD and calculated the midpoint geometry. Displayed XY data and exported XY using NAD 1983 BC Environment Albers to a class. Merged all midpoints together for each applicable folder (i.e. shf_files_plotted). Used identify duplicate fields calculation to make sure keycode field is unique. Using Microsoft Access query, selected all records within burger data files ('coded_with_behaviour' ) where [dccoWat] > 0 with survey months >11 or <3 and exported to a separate feature table. Deleted all species' fields except those relevant to the target feature(s) identified. Joined master survey table to spatial layer using keycode field in both spatial and aspatial. Data_Source field calculated to equal the name of the dataset from which the data was derived. Dataset_ID field calculated to equal the common dataset identifier as categorized by BCMCA. Surveys_Total and Surveys_Species_Sighted fields calculated to equal one to reflect each keycode value. nbirds_Total field calculated to equal the value recorded in the species' survey table. Buffered line transects to 150m (radius) using Buffer tool.

Process_Step:

Process_Description:

Merged all prepared datasets using Merge tool to create one layer storing all Double-crested Cormorant winter sites. During merge process like fields were combined using Field Map window to eliminate duplicate or redundant column headings. Field map was also used to eliminate unnecessary fields not applicable for final feature layer requirements.

Process_Step:

Process_Description: Created Metadata

Process_Step:

Process_Description:

>Created Survey File:

Added 2 new fields: Area_km2 and Density_km2. Area_km2 calculated by multiplying the shape area (m2) by .000001. Density_km2 Density field calculated using the following formula: [nbird_Total / [Area_km2]. Note: Burger data was not used to create feature as behaviour did not include on water counts.

Process_Step:

Process_Description: Updated Metadata

Process_Contact:

Contact_Information:

Contact_Person_Primary:

Process_Step:

Process_Description:

>Created Final Processed File:

Overlaid merged feature polygons with BCMCA planning units using Spatial Join tool. Tool parameter example: Target Feature = dfo_bc_2k_4k_combined.shp, Join Features = feature layer, Join Operation = Join_One_to_Many, Match Option = Intersects. To create the final processed file, summarized data by planning unit ID and calculated the sum of the total surveys, the sum of the surveys species sighted, and the sum of the density. Added a new field: AVG_DENSITY_km2. Calculated field using the following formula: [sum_DENSITY_km2] / [sum_SURVEYS_TOTAL].

Process_Step:

Process_Description: Updated Metadata

Process_Contact:

Contact_Information:

Contact_Person_Primary:

Contact_Person:

Steps up to and including this one completed by Melissa Meneghetti

Contact_Organization: Coastal Resource Mapping

Contact_Position: Spatial Analyst

Process_Step:

Process_Description: Unit ID updated to match new BCMCA planning unit IDs

Source_Used_Citation_Abbreviation:

O:\BCMCA\Data_Andy_temp_June07\Nearshore_metadata\DoubleCrestedCormorant.xml

Process_Date: June 2010

Process_Contact:

Contact_Information:

Contact_Person_Primary:

Contact_Person: Andy Pettersson

Contact_Organization: BCMCA

Contact_Position: GIS Contractor

Spatial_Data_Organization_Information:

Direct_Spatial_Reference_Method: Vector

Point_and_Vector_Object_Information:

SDTS_Terms_Description:

SDTS_Point_and_Vector_Object_Type: G-polygon

Point_and_Vector_Object_Count: 941

SDTS_Terms_Description:

SDTS_Point_and_Vector_Object_Type: Label point

Point_and_Vector_Object_Count: 39346

SDTS_Terms_Description:

SDTS_Point_and_Vector_Object_Type: GT-polygon composed of chains

Point_and_Vector_Object_Count: 39346

SDTS_Terms_Description:

SDTS_Point_and_Vector_Object_Type: Point

Point_and_Vector_Object_Count: 4

Spatial_Reference_Information:

Horizontal_Coordinate_System_Definition:

Planar:

Map_Projection:

Map_Projection_Name: Albers Conical Equal Area

Albers_Conical_Equal_Area:

Standard_Parallel: 50.000000

Standard_Parallel: 58.500000

Longitude_of_Central_Meridian: -126.000000

Latitude_of_Projection_Origin: 45.000000

False_Easting: 1000000.000000

False_Northing: 0.000000

Planar_Coordinate_Information:

Planar_Coordinate_Encoding_Method: coordinate pair

Coordinate_Representation:

Abscissa_Resolution: 0.000100

Ordinate_Resolution: 0.000100

Planar_Distance_Units: meters

Geodetic_Model:

Horizontal_Datum_Name: North American Datum of 1983

Ellipsoid_Name: Geodetic Reference System 80

Semi-major_Axis: 6378137.000000

Denominator_of_Flattening_Ratio: 298.257222

Vertical_Coordinate_System_Definition:

Altitude_System_Definition:

Altitude_Resolution: 0.000100

Altitude_Encoding_Method:

Explicit elevation coordinate included with horizontal coordinates

Entity_and_Attribute_Information:

Detailed_Description:

Entity_Type:

Entity_Type_Label: DoubleCrestedCormorant

Attribute:

Attribute_Label: OBJECTID_1

Attribute_Definition: Internal feature number.

Attribute_Definition_Source: ESRI

Attribute_Domain_Values:

Unrepresentable_Domain:

Sequential unique whole numbers that are automatically generated.

Attribute:

Attribute_Label: Shape_Area

Attribute_Definition: Area of feature in internal units squared.

Attribute_Definition_Source: ESRI

Attribute_Domain_Values:

Unrepresentable_Domain: Positive real numbers that are automatically generated.

Attribute:

Attribute_Label: UNIT_ID

Attribute:

Attribute_Label: Shape

Attribute_Definition: Feature geometry.

Attribute_Definition_Source: ESRI

Attribute_Domain_Values:

Unrepresentable_Domain: Coordinates defining the features.

Attribute:

Attribute_Label: Cnt_UNIT_ID

Attribute:

Attribute_Label: Sum_SURVEYS_SPECIES_SIGHTED

Attribute_Definition:

Sum of the survey in which species sighted fields for each survey area by planning unit.

Attribute:

Attribute_Label: Sum_SURVEYS_TOTAL

Attribute_Definition: Sum of the survey fields for each survey area by planning unit.

Attribute:

Attribute_Label: Sum_DENSITY_km2

Attribute_Definition:

Sum of the density fields for each survey area by planning unit.

Attribute:

Attribute_Label: AVG_DENSITY_km2

Attribute_Definition: Weighted average by dividing the density sum by the survey sum.

Attribute:

Attribute_Label: Shape_Length

Attribute_Definition: Length of feature in internal units.

Attribute_Definition_Source: ESRI

Attribute_Domain_Values:

Unrepresentable_Domain: Positive real numbers that are automatically generated.

Attribute:

Attribute_Label: LOG

Attribute:

Attribute_Label: TRANSFORM_DENSITY

Attribute:

Attribute_Label: ID

Overview_Description:

Entity_and_Attribute_Detail_Citation:

Species' targeted season, moulting and staging months were defined using the following tech report: <http://www.bsc-eoc.org/library/bccwstrends2008.pdf>.

Distribution_Information:

Distributor:

Contact_Information:

Contact_Organization_Primary:

Contact_Organization: British Columbia Marine Conservation Analysis

Contact_Instructions: See www.bcmca.ca for distribution details

Resource_Description: Downloadable Data

Standard_Order_Process:

Digital_Form:

Digital_Transfer_Information:

Transfer_Size: 50.954

Metadata_Reference_Information:

Metadata_Date: 20100617

Metadata_Contact:

Contact_Information:

Contact_Person_Primary:

Contact_Person: Carrie Robb

Contact_Organization: Living Oceans Society (for BCMCA)

Contact_Position: GIS Specialist

Contact_Address:

Address_Type: mailing and physical address

Address: 1405-207 W. Hastings St.

City: Vancouver

State_or_Province: BC

Postal_Code: V6B 1H7

Country: Canada

Contact_Voice_Telephone: (604) 696-5044

Contact_Electronic_Mail_Address: crobb@livingoceans.org

Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata

Metadata_Standard_Version: FGDC-STD-001-1998

Metadata_Time_Convention: local time

Metadata_Extensions:

Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>

Profile_Name: ESRI Metadata Profile

Metadata_Extensions:

Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>

Profile_Name: ESRI Metadata Profile