StormPetrels_Colonies_MARXAN

Metadata also available as

Metadata:


Identification_Information:
Citation:
Citation_Information:
Originator:
The British Columbia Marine Conservation Analysis (BCMCA), a Tides Canada Initiatives Project
Publication_Date: November, 2009
Title: StormPetrels_Colonies_MARXAN
Geospatial_Data_Presentation_Form: vector digital data
Series_Information:
Series_Name: Ecological Data
Publication_Information:
Publisher: BCMCA
Online_Linkage:
\\vancouverserver\gis\BCMCA\data4Marxan_May2010\Seabirds\seabird_marxan_features.mdb
Description:
Abstract:
The British Columbia Marine Conservation Analysis (BCMCA) is a collaborative project assembling and analyzing spatial information about Canada's Pacific Ocean. The overall goal of the BCMCA is to identify marine areas of high conservation value and marine areas important to human use. Results of the project are intended to inform and help advance marine planning initiatives in BC by providing collaborative, peer-reviewed scientific analyses based on the best ecological and human use spatial data at scales relevant to a BC coast-wide analysis.
Purpose:
The purpose of this dataset is to identify areal extents of Storm Petrel colony locations to help inform the marine feature identified at the BCMCA Seabirds Workshop. Data presented in 2x2 km planning units for MARXAN analysis.
Supplemental_Information:
This dataset is a compilation of data collected by many people, for different purposes, using different survey techniques with different methodologies within each technique and, therefore, considerable care must be taken when using the data, even for site-specific inquiries. Refer to the original metadata document for data limitations and usage. Title or link is provided within source information. Data was collected, merged and buffered by target feature layer using the following data sources: 1. CWS Seabird Colony data. 2. Parks Canada Nesting Seabird Colony data.
Time_Period_of_Content:
Time_Period_Information:
Single_Date/Time:
Calendar_Date: unknown
Currentness_Reference: ground condition
Status:
Progress: Complete
Maintenance_and_Update_Frequency: None planned
Spatial_Domain:
Bounding_Coordinates:
West_Bounding_Coordinate: -133.303466
East_Bounding_Coordinate: -124.958925
North_Bounding_Coordinate: 54.492907
South_Bounding_Coordinate: 48.515147
Keywords:
Theme:
Theme_Keyword_Thesaurus:
REQUIRED: Reference to a formally registered thesaurus or a similar authoritative source of theme keywords.
Theme_Keyword: Storm Petrels (Fork-tailed, Leach's, General)
Theme_Keyword: Colony locations
Place:
Place_Keyword: British Columbia
Access_Constraints:
This dataset is subject to the terms and conditions of the data use agreements for the source datasets.
Use_Constraints:
This dataset is subject to the terms and conditions of the data use agreements for the source datasets.
Point_of_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Karin Bodtker
Contact_Organization: British Columbia Marine Conservation Analysis
Contact_Position: BCMCA Co-Chair
Contact_Address:
Address_Type: mailing and physical address
Address: 1405-207 West Hastings Street
City: Vancouver
State_or_Province: BC
Postal_Code: V6B 1H7
Country: Canada
Contact_Voice_Telephone: 6046965044
Contact_Electronic_Mail_Address: kbodtker@livingoceans.org
Native_Data_Set_Environment:
Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.3.1.3500

Data_Quality_Information:
Lineage:
Source_Information:
Source_Contribution:
Canadian Wildlife Service (CWS). Dataset Name: Sites.shp. Includes the locations of all known seabird colonies. Points representing seabird colony locations were digitized using a 1:250000 basemap. Locations of all colonies were checked against 1:20000 TRIM and marine digital charts. Some of the colonies were shifted slightly to correspond to visible islands. Contains data from other sources with surveys conducted after 1989. Data sources include BCMOE, Parks Canada, Laskeek Bay Conservation Society and Bamfield Marine Station. Refer to original metadata document for data usage and limitations. Metadata document: bc_seabirdColonies_to_2007_updatedJune2008_meta.doc.
Source_Information:
Source_Contribution:
Parks Canada. Dataset Name: NestingSeabirdsColonies.shp. Metadata document: Not supplied, however, updated using ArcCatalog. Haida Gwaii known nesting colonies of Petrels, Cormorants, Glaucous-winged Gulls, Murres, Pigeon Guillemots, Ancient Murrelets, Auklets and Puffins.
Source_Information:
Source_Contribution:
CWS Marine Bird Areas of Interest. Dataset Name: CWS_Marine_Bird_Areas_of_Interest_May2007.shp. Dataset was only used where CWS and Parks Canada datasets lacked coverage. Combines data from other requested datasets: Coastal Water bird inventory, Moulting Seaducks, Seabird Ship Surveys, WVI Waterbird Survey, Great Blue Heron Colony datasets, Herring Spawn, Pelagic Seabird Survey, Seabird Colony Inventory. Many of the MBAOI's were chosen based upon an area's significant bird numbers, hence, dataset may not include full coverage of BCMCA marine target features. In most datasets, a buffer distance was determined and applied based on the species type or survey method. After buffering the data, a 1:20,000 TRIM shoreline was used to ERASE any portions that fell on land. Refer to the original metadata document for a full descritpion: CWS Marine Bird Areas of Interest project_May2007_meta.doc.
Source_Information:
Source_Contribution: BCMCA 2 km x 2 km planning units for the Canadian Pacific EEZ.
Process_Step:
Process_Description:
<<The methods used to combine datasets to identify areal extents of Storm Petrel colony locations are as follows >>
Source_Used_Citation_Abbreviation:
\\CRMLTD03\E$\F\Crm1143\Source\080818_SourceDocs\Original_Data\Plants\BCMCA_Plants.gdb
Process_Step:
Process_Description:
--> Prepared CWS dataset:
Within SiteSurveys geodatabase table, selected by attributes all FTSP (Fork-tailed Storm Petrels), LSPE (Leach's Storm Petrels), STPE (Unidentified Storm Petrels) and exported into separate table. To maintain one-to-many relationship between spatial and aspatial, joined Sites spatial point layer to Storm Petrel table via GISkey field.
Process_Step:
Process_Description:
Displayed XY data using newly created X_COOR and Y_COORD fields and using PCS Albers as coordinate system imported from Sites.shp. Exported data into feature class. Added 3 new fields using Add Field tool: Feature, Data_Source, Dataset_ID. Populated fields using Calculate Field tool. Feature field calculated to equal the common name of the marine feature. Data_Source field calculated to equal the name of the dataset the data was derived from. Dataset_ID field calculated to equal the common dataset identifier as categorized by BCMCA.
Process_Step:
Process_Description:
Re-projected from PCS Albers to NAD 1983 BC Environment Albers using Project tool.
Process_Step:
Process_Description:
--> Prepared Parks Canada dataset:
**Tables within original geodatabase were corrupted. Created new "File" geodatabase NestingSeabirdColonies2. Exported (right click - export - to dbase (multiple) all geodatabase tables to new geodatabase.** Converted NestingSeabirdColonies shapefile to geodatabase feature class using feature class to feature class tool.
Process_Step:
Process_Description:
To maintain one-to-many relationship between spatial and aspatial, added 2 new fields to NestingSeabirdsColonies2 point feature class "X_COORD" and "Y_COORD" and calculated geometry. Joined spatial point layer to aspatial "Petrels" table using Site field. Displayed XY coordinates and exported data into feature class using NAD 1983 BC Environment Albers coordinate system.
Source_Used_Citation_Abbreviation: C:\F\Crm1143\Admin\MetaData\BullKelp_Final.xml
Process_Step:
Process_Description:
Added 3 new fields using Add Field tool: Feature, Data_Source, Dataset_ID. Populated fields using Calculate Field tool. Feature field calculated to equal the common name of the marine feature. Data_Source field calculated to equal the name of the dataset the data was derived from. Dataset_ID field calculated to equal the common dataset identifier as categorized by BCMCA.
Process_Step:
Process_Description:
Overlaid both Parks Canada and CWS colony data and reviewed each point. The following rules were used to create final feature layer: 1. If duplicate inventory years were recorded within CWS dataset, the point representing the most recent inventory year was kept. The same approach was used for the Parks Canada dataset. 2. If attributes (location, count and year) matched between CWS and Parks dataset, the CWS point was used and Parks points deleted. 3. In some cases, the most recent inventory date did not provide population estimates. In these cases, both inventory years were kept. This was generally found within Parks data. 4. In some cases, multiple points (CWS and Parks) were located on one island, attribute review revealed different count data. In these cases, PC points were deleted. 5. In some cases, the Parks data had the most recent inventory date. If the CWS attributes matched Parks, the most recent Parks inventory point was used to represent the seabird colony location and the CWS point was deleted. 6. In some cases, the CWS data summarized all Parks count data within small areas (i.e. Harrison Island) into one generalized point. In these cases, if the summed Parks count data matched CWS count data, the generalized CWS point was used to represent the seabird colony. Note: CWS metadata mentions NestPair estimated numbers are rounded off. In some cases, count attribute comparison between Parks and CWS data were slightly off due to rounding. In these cases, CWS point was kept. Both datasets contain source information in the table of attributes. For the CWS dataset, the source is listed as a number (DataRef field) and the metadata contains a listing of each source dataset by number. For the PC dataset, the source if written out in the file (Source field).
Process_Step:
Process_Description:
Merged CWS Seabird Colony and Parks Nesting Colony datasets using Merge tool to create one dataset storing all Storm Petrel Colony point data. During merge process like fields were combined using Field Map window to eliminate duplicate or redundant column headings. Field Map was also used to eliminate unnecessary fields not applicable for final feature layer requirements.
Process_Step:
Process_Description:
Buffered merged colony point data to 5000m (radius) using Buffer tool. This buffer distance follows the methodology used in the CWS Marine Birds Areas of Interest database.
Process_Step:
Process_Description:
--> Reviewed CWS Marine Bird Areas of Interest dataset:
Selected by attributes all records where DATASOURCE equaled Seabird Colony Inventory and species = FTSP or species = LSPE. Checked overlap with both Parks and CWS storm petrel colony locations. All features were duplicated - no MBAOI polygons were used to create feature.
Process_Step:
Process_Description:
Merged CWS Seabird Colony and Parks Nesting Colony datasets using Merge tool to create one dataset storing all Storm Petrel Colony data. During merge process like fields were combined using Field Map window to eliminate duplicate or redundant column headings. Field Map was also used to eliminate unnecessary fields not applicable for final feature layer requirements.
Process_Step:
Process_Description: Created Metadata.
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person:
Steps up to and including this one completed by Melissa Meneghetti
Contact_Organization: Coastal Resource Mapping
Process_Step:
Process_Description:
Seven NULL values found in [NestPairs] changed to '0' using the Field Calculator. Records changed: Dataset_ID = 90
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Mathew Evans
Contact_Organization: BCMCA
Contact_Position: GIS Contractor
Process_Step:
Process_Description:
Colonies were grouped based on the site name and the count of nest pairs was summed when both of the storm petrel species (Leach's and Fork-tailed) were observed at the same colony. Relative Importance (RI) field created and populated based on the values in NestPairs. Highly Important = 3 (>5% of total BC population); Moderately Important = 2 (1-5% of total BC population); and Less Important = 1 (<1% of total BC population).
Process_Date: April 2010
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Carrie Robb
Contact_Organization: Living Oceans Society (for BCMCA)
Contact_Position: GIS Specialist
Process_Step:
Process_Description:
Colonies dissolved based on RI and intersected with BCMCA planning units. ID field added to hold marxan ID. Extraneous fields were removed. Lastly, the file was dissolved again based on the Unit ID and ID fields to ensure there was a unique record for each planning unit and importance class.
Source_Used_Citation_Abbreviation: C:\DOCUME~1\CARRIE~1\LOCALS~1\Temp\xml8D.tmp
Process_Date: April 2010
Process_Time: 19425000
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Carrie Robb
Contact_Organization: Living Oceans Society (for BCMCA)
Contact_Position: GIS Specialist
Process_Step:
Process_Description: Unit ID updated to match new BCMCA planning unit IDs
Source_Used_Citation_Abbreviation: O:\BCMCA\Data_Andy_temp_June07\StormPetrels_Colonies_MARXAN.xml
Process_Date: June 2010
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Andy Pettersson
Contact_Organization: BCMCA
Contact_Position: GIS Contractor

Spatial_Data_Organization_Information:
Direct_Spatial_Reference_Method: Vector
Point_and_Vector_Object_Information:
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: G-polygon
Point_and_Vector_Object_Count: 1528
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: Label point
Point_and_Vector_Object_Count: 39346
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: GT-polygon composed of chains
Point_and_Vector_Object_Count: 39346
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: Point
Point_and_Vector_Object_Count: 4

Spatial_Reference_Information:
Horizontal_Coordinate_System_Definition:
Planar:
Map_Projection:
Map_Projection_Name: Albers Conical Equal Area
Albers_Conical_Equal_Area:
Standard_Parallel: 50.000000
Standard_Parallel: 58.500000
Longitude_of_Central_Meridian: -126.000000
Latitude_of_Projection_Origin: 45.000000
False_Easting: 1000000.000000
False_Northing: 0.000000
Planar_Coordinate_Information:
Planar_Coordinate_Encoding_Method: coordinate pair
Coordinate_Representation:
Abscissa_Resolution: 0.000315
Ordinate_Resolution: 0.000315
Planar_Distance_Units: meters
Geodetic_Model:
Horizontal_Datum_Name: North American Datum of 1983
Ellipsoid_Name: Geodetic Reference System 80
Semi-major_Axis: 6378137.000000
Denominator_of_Flattening_Ratio: 298.257222
Vertical_Coordinate_System_Definition:
Altitude_System_Definition:
Altitude_Resolution: 0.000100
Altitude_Encoding_Method:
Explicit elevation coordinate included with horizontal coordinates

Entity_and_Attribute_Information:
Detailed_Description:
Entity_Type:
Entity_Type_Label: StormPetrels_Colonies_MARXAN
Attribute:
Attribute_Label: OBJECTID
Attribute_Definition: Internal feature number.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain:
Sequential unique whole numbers that are automatically generated.
Attribute:
Attribute_Label: Shape
Attribute_Definition: Feature geometry.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain: Coordinates defining the features.
Attribute:
Attribute_Label: Shape_Area
Attribute_Definition: Area of feature in internal units squared.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain: Positive real numbers that are automatically generated.
Attribute:
Attribute_Label: UNIT_ID
Attribute:
Attribute_Label: Shape_Length
Attribute_Definition: Length of feature in internal units.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain: Positive real numbers that are automatically generated.
Attribute:
Attribute_Label: RI
Attribute_Definition:
Relative Importance (RI) based on the count of birds at this colony vs. the BC population.
Attribute:
Attribute_Label: ID
Attribute_Definition: Marxan ID
Overview_Description:

Distribution_Information:
Distributor:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: British Columbia Marine Conservation Analysis
Contact_Instructions: See www.bcmca.ca for distribution details
Resource_Description: Downloadable Data
Standard_Order_Process:
Digital_Form:
Digital_Transfer_Information:
Transfer_Size: 50.954

Metadata_Reference_Information:
Metadata_Date: 20100617
Metadata_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Carrie Robb
Contact_Organization: Living Oceans Society (for BCMCA)
Contact_Position: GIS Specialist
Contact_Address:
Address_Type: mailing and physical address
Address: 1405-207 West Hastings Street
City: Vanvouver
State_or_Province: BC
Postal_Code: V6B 1H7
Country: Canada
Contact_Voice_Telephone: 604-696-5044
Contact_Electronic_Mail_Address: crobb@livingoceans.org
Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998
Metadata_Time_Convention: local time
Metadata_Extensions:
Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
Profile_Name: ESRI Metadata Profile
Metadata_Extensions:
Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
Profile_Name: ESRI Metadata Profile

Generated by mp version 2.9.6 on Thu Aug 26 15:18:02 2010